Manufacturer | Part # | Datasheet | Description |
Allegro MicroSystems
|
ATS636LSE |
348Kb/15P |
The ATS636LSE programmable, true power-on state (TPOS), device is optimized Hall-effect IC and rare-earth pellet combinations that switch in response to magnetic signals... |
A8600 |
2Mb/52P |
Designed to provide the power supply requirements of next generation car audio and infotainment systems, the A8600 provides all the control and protection circuitry to produce... |
A4402 |
328Kb/17P |
The A4402 is a dual-output regulator, combining in a single package a constant on-time buck regulator and a linear regulator (LDO)?봢ach with adjustable output voltages. |
A4941 |
226Kb/9P |
The A4941 three-phase motor driver incorporates BEMF sensing to eliminate the requirement for Hall sensors in fan applications. |
A5348 |
282Kb/9P |
The A5348 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. |
A5366 |
322Kb/13P |
The A5366 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. |
A5358 |
326Kb/13P |
The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. |
A5367 |
281Kb/10P |
The A5367 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. |
A4490 |
397Kb/17P |
Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4490 provides three high current, |
A4402 |
378Kb/15P |
Constant On-Time Buck Converter with Integrated Linear Regulator |
A4402KLPTR-T |
326Kb/17P |
Constant On-Time Buck Converter With Integrated Linear Regulator |
A4491 |
399Kb/16P |
Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4491 provides three high current, |
A4402 |
378Kb/15P |
Constant On-Time Buck Converter with Integrated Linear Regulator |
A4401 |
417Kb/17P |
This device provides all the necessary control functions to provide the power rails for driving a vacuum fluorescent display (VFD) using minimal external components. |
A1101 |
285Kb/13P |
The Allegro A1101-A1104 and A1106 Hall-effect switches are next generation replacements for the popular Allegro 312x and 314x lines of unipolar switches. |
A8731 |
466Kb/16P |
The Allegro A8731 Xenon photoflash charger IC is designed to meet the needs of ultra-low power, small form factor cameras, particularly camera-phones. |
A4407 |
1Mb/29P |
The A4407 is an automotive power management IC that uses a 2.2 MHz constant on-time (COT) buck pre-regulator to supply a 5 V linear regulator, a 5 V tracking/protected linear regulator, |
A4492 |
355Kb/16P |
Designed to provide the power supply requirements for automotive applications, the A4492 provides three high current, high performance, switching regulator outputs with independent soft start. |
A4406 |
1Mb/27P |
The A4406 is an automotive power management IC that uses a high frequency constant on-time 5.45 V pre-regulator to supply an internal 5 V linear regulator and a 3.3 V linear DMOS driver. |
A4405 |
1Mb/27P |
The A4405 is an automotive power management IC that uses a high frequency constant on-time 5.45 V pre-regulator to supply two internal 5 V linear regulators and a 3.3 V linear DMOS driver. |