Electronic Manufacturer | Part Number | Datasheet | Electronics Description |

PHOENIX CONTACT
|
2906155 |
 |
Safe electrical isolation between output, input, supply, and error message output |
2727776 |
 |
Inline analog output terminal, without accessories, 1 output, 0-10 V, 2- conductor connection method |
2726298 |
 |
Inline analog output terminal, without accessories, 1 output, 0-20 mA, 4-20 mA, 0-10 V, 2-wire connection method |
2835613 |
 |
Ex-i output signal conditioner, HART-capable. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Galvanic 3-way isolation (input / output / supply). Line fault detection. |
2300096 |
 |
Power optocoupler, with protection circuits in 24 V DC input and output circuits. Direct current voltage output max. 3 A |
2701219 |
 |
Inline analog output terminal, version for extreme conditions, complete with accessories (connector plug and labeling field), 1 output, 0 - 20 mA, 4 - 20 mA, 0 - 10 V, 2-conductor connection technology |
PLC-OSC-5DC |
 |
Input solid-state relay, transmission frequency: 100 kHz, with LED and protective circuit in input and output v |
2727624 |
 |
Connector, colored identification, for digital 4, or 16-channel Inline output terminal blocks |
ST-OV2-5DC |
 |
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 5 V DC, output: 12 - 60 V DC/max. 1 A, can be plugged into basic terminal blocks |
2726269 |
 |
Inline digital output terminal block, without accessories, 8 outputs, 24 V DC, 500 mA, 4-wire connection method |
SIM-EI-60DC |
 |
Input solid-state relay, with protective circuit in input and output circuits, input: 48 - 60 V DC, output: 8 - 48 V DC/100 mA |
ST-OV2-60DC |
 |
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 48 - 60 V DC, output: 12 - 60 V DC/max. 1 A, can be plugged into basic terminal blocks |
2742696 |
 |
Inline digital output terminal block, without accessories, 4 outputs, 12 to 253 V AC, 1 A, 3-wire connection method |
EMG10-OV-5DC |
 |
The illustration shows version EMG 10-OV, with DC voltage output, max. 1 A |
EMG10-OV-24DC |
 |
The illustration shows version EMG 10-OV, with DC voltage output, max. 1 A |
2924087 |
 |
Intrinsically safe NAMUR isolating amplifier, 2-channel, with relay output |
2865036 |
 |
Line fault detection (LFD), can be activated/deactivated, error indicated by red flashing LED with disabling of transistor output |
EMG12-OV-5DC |
 |
Protective circuit in input and output |
2900174 |
 |
Output module - UM-2KS50/ 8DO/RS/MKDS |
EMG10-OV-220DC |
 |
Protective circuit in input and output |