| Manufacturer | Part # | Datasheet | Description |
Tyco Electronics
|
408-6626 |
101Kb/2P |
The clinching tool consists of a handle, upper jaw lower jaw. |
| 411-18339 |
2Mb/11P |
The operating manual must be constantly within reach of the tool. |
| 412-18745 |
1Mb/26P |
The operating manual must be constantly within reach of the tool. |
| 408-4020 |
215Kb/4P |
This instruction sheet provides application and maintenance procedures for Hand Tool |
| 408-4350 |
242Kb/6P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-4349 |
244Kb/5P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-4135 |
246Kb/6P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-4351 |
246Kb/6P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-4343 |
246Kb/5P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-4404 |
132Kb/5P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-10381 |
246Kb/6P |
The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping. |
| 408-10057 |
86Kb/2P |
Press down evenly on the extraction tool until it bottoms on the chicklet |
| 1583010 |
244Kb/2P |
CERTI-CRIMP II TOOL DATA SHEET 040 CT, EP, POWER DBL LOOK & DRAWER CONTACTS |
| 408-10312 |
228Kb/4P |
Closed-Head Assembly 2031460- 1 for Use with the Electro-Hydraulic Hand Tool Assembly |
| 58524-2 |
241Kb/5P |
PRO-CRIMPER III Hand Crimping Tool Assembly 58524- 1 with Die Assembly 58524- 2 |
| 408-10366 |
171Kb/3P |
The Electro--Hydraulic Hand Tool and specific DAHT head assemblies must be ordered separately. |
| 408-1311 |
371Kb/7P |
Pneumatic crimping heads listed in Figure 1 are designed for use in Pneumatic Tool |
| 408-8647 |
97Kb/2P |
Press down evenly on the tool until the rear leg bottoms on the pc board. |
| 408-10236 |
152Kb/3P |
The seating tool consists of an adapter, a signal contact blade, and a power contact blade. |
| 408-10281 |
306Kb/4P |
The tool frame features two jaws, a handle, ratchet adjustment wheel, and an emergency ratchet release. |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
